HEATING OVER VEST #BLACK [MOA-LAN-07]

■DESCRIPTION■

Introducing the "MILITARY OVERVEST," which is based on a new hooded blouson and can be used as both an inner and outer layer.

This item is based on the PCULEVEL 7 INSULATED JACKET used by the US Special Forces and has been adapted for modern fashion.

The wide armholes make this item easy to layer with thick sweatshirts and knits.

With an urban look, the design can be matched with a wide range of outfits, from casual to smart.

It's great for town wear as well as active scenes.

The chest pocket uses a concealed zipper, so it is minimal yet has excellent storage capacity.

The inner pocket is an upgraded version of the LEVEL7 military outerwear pocket, making it more multifunctional.

Designed based on the theme of "choosing to wear something instead of a bag," it is also fully functional, with mesh pockets and multi-function pockets that allow you to go out empty-handed.

The outer material is nylon taslan ripstop.


By weaving it at a high density using nylon yarn that has been treated with Taslan processing, the fabric is lightweight yet firm and resilient, and has excellent durability and water repellency.

This is an extremely lightweight jacket with excellent heat retention and functionality.

It is designed to be worn as an outerwear, so it has a slightly larger size.

With its refined design and multi-functional outerwear, it is sure to be useful as street wear.

- The heating device allows you to warm the back area and adjust the temperature.
- The water-repellent outer fabric is stain-resistant and repels water.
- Uses graphene, a carbon-based fiber with excellent thermal conductivity, for padding and lining.

Efficient heat conduction provides optimal performance at low temperatures and low power consumption.

The graphene-based padding has a high air capacity, is bulky, lightweight, and has excellent heat retention.

- The back collar attachment uses LANTERN logo printed tape with laser cut black reflector.

Black reflective piping is inserted into the back transition, and when light hits it in a dark place, the black reflector reflects light, letting others know your location.



[Features of Heating Device Wear]
This is padded clothing that allows you to adjust the temperature using the power and temperature control switch on the chest.

The heating device works by connecting a rechargeable battery to the USB plug on this product, and the switch changes color depending on the set temperature.

The heat plate, which is the heat source, is made from carbon fiber and warms the body from the core through far-infrared rays.

The operating time of the heating device varies depending on the charged battery capacity and set temperature.


[How to use the heating device]
1: Place the rechargeable battery in the chest storage pocket and plug in the USB plug.

*Please also check the remaining charge of the charging battery and that it is powering up (the battery protection function is not activated).


2: Press and hold the power switch on the chest (2 to 3 seconds) until the LED flashes in four colors and the heating device turns on.


When the red (very hot) light is flashing it is heating up rapidly.

If no switch operation is performed for approximately 5 minutes, the temperature will automatically change to purple (medium).


3: After turning on the power, you can change the temperature to your liking by briefly pressing the switch.
(※The light color changes depending on the temperature.)

4: Press and hold the power temperature switch on the chest (2 to 3 seconds) until the LED flashes in four colors and the heating device stops.


[About rechargeable batteries]
USB output port Output voltage: 5V Output current: 2A or more Estimated usable time (5000mAh)
Ultra-high temperature (red): 50℃/1.85H
High temperature (yellow): 40℃/2.5H
Medium temperature (purple): 30℃/3.75H
Low temperature (blue): 20℃/7.5H
(*The above figures are for an ambient temperature of 5°C.)
The temperatures and times are approximate.

It is not an absolute value.



[ATTENTION]
- Wet cleaning at a dry cleaner is recommended.
Please see the washing label for details.
(* Be sure to remove the rechargeable battery.)

- It was designed and produced as a supplementary heating garment to be worn over clothing.
Please do not use it for any other purpose.

- Please use with caution to avoid low-temperature burns.

- Please note that we will not be held responsible for any breakdowns, repairs, accidents, or other problems that occur if the product is used for purposes other than its intended use.

■MODEL■
181cm 70kg wearing size: XL

■MATERIAL■
Outer material: 100% NYLON (NYLON RIP STOP water repellent finish)
Lining: 100% NYLON (GRAPHENE RIP STOP)
Filling: POLYESTER 100% (GRAPHENE 120g)
Mesh: 100% POLYESTER
With rechargeable battery

■SIZE SPEC■
[M] Shoulder width: 45.2cm Body width: 62.5cm Length: 70.5cm

[L] Shoulder width: 47cm Width: 65cm Length: 72.5cm

[XL] Shoulder width: 48.8cm Body width: 67.5cm Length: 74.5cm

■ATTENTION■
-The listed dimensions may vary depending on the product processing and texture of the fabric, even for the same product.
・We provide products from our stock, but some may be display items.
- When washing the product yourself, please be careful to avoid shrinkage and color transfer.

[About ordering]
-We do not accept cancellations after the day after placing your order.
Also, there has been an increase in the number of people ordering with the wrong items. Please check carefully before placing your order.
・Cancellations after shipment are not permitted.
- We use the transparent bags and tissue paper that the products come in when they are shipped from the manufacturer, but if they are damaged, we may replace them with our own standard transparent bags.
(This also applies to bags with logos or product names on them.)
・For large value orders or if your customer information is unknown, we may contact you by phone to verify your identity.
There have also been many instances of credit card fraud involving the use of third party credit cards.
We may contact you based on our credit card application process, but please understand that this is a measure to prevent credit card fraud.

■PRODUCT CODE■
MOA-LAN-07